Does the hub need maintenance for a long ride

The hub ride for a long time also needs maintenance, and long riding the hub without maintenance may cause the bearings to burst. And other problems occur. The maintenance of the foundation is nothing more than some regular cleaning of the flywheel, and even more so, the complete disassembly and maintenance of the tower base and the disassembly and maintenance of the hub bearing itself.
In fact, there is no need to disassemble and maintain these bearings, but because I am reluctant to replace them with new ones, I disassemble them for maintenance. If it is not tilted and maintained in time, the bearing of the tower base may explode and affect the safety of riding, but such a set of fairly thorough disassembly and cleaning maintenance. If you go to the car shop to do it, it is quite unworthy, because then you might as well go directly to a new base of the tower.
Just like my rT wheelset, the front and rear - have been using 368 free shipping for several years. If you go to the car shop, it's more expensive than you would buy a wheel. Then this maintenance I still choose to use citrus oil solvent-based degreaser to clean these workpieces, by wiping can find that these large pieces of oil visible on the surface can be easily cleaned, but the fine oil hidden deep in these gaps still need solvent-based degreaser to clean, no ultrasonic manual shock cleaning of it.