The process flow of bicycle bowl set mainly includes the following steps:
1.The basic structure of assembling a bowl set: The bowl set is mainly composed of four parts: a pair of bead nests (bowls), two sets of ball bearings, a pair of bead stoppers, and several bowl set fixators. These components need to be assembled correctly to ensure the functionality and stability of the bowl assembly.
2.Lubrication and installation: Before installation, it is necessary to apply solid lubricating oil to the inner lines at both ends of the head tube and the assembly surface of the upper bowl, and insert the tightening tool into the head tube to apply lubricating oil to the assembly surface of the lower bowl. Then put the other piece of the tool into the lower bowl, and put the lower bowl and the tool onto it. Screw in the bottom tightening nut, rotate the handle of the tool to tighten it, and keep the axis of the tool fixed.
3.Install the base of the front fork bowl: Install the base of the front fork bowl, place it into the upper tube of the front fork, and apply solid lubricating oil to the inner surface of the base. Then insert a suitable sleeve and carefully tap the tool into the upper tube of the front fork. Check if the base and front fork are tightly fitted, and complete the assembly of the base.
4.Adjustment and inspection: After installation, it is necessary to check the core steps of the bowl assembly, including placing the hanging core cover, screwing in the screws, and applying torque. When performing this step, it is important to loosen the standing screws, otherwise the hanging core is likely to be twisted and scrapped. Finally, check the installation depth of the sunflower, which generally requires a minimum of 3mm below the top of the rudder tube.
By following the above steps, the correct installation and effective operation of the bicycle bowl set can be ensured, thereby guaranteeing the performance and safety of the bicycle.
We are Ningbo Shenglu Bicycle Industry Co., Ltd., a professional bicycle parts manufacturer, supplier, and manufacturer. The main products include five series: bicycle axle pads, brakes, center axles, bowl sets, flywheels, etc. Our products are exported to more than 100 countries and regions around the world. It is one of the globally renowned brands. Interested buyers are welcome to contact customer service or send an email to inquire about purchasing. website: https://www.hubs-sf.com
Product Display
Model: A213R Model: A214R
Model: A223R Model: HB03R
Model: HB11F Model: A252F
